DigiTerra Explorer Setting up devices with DigiTerra Explorer v7

	Device name	COM Port	Baudrate
	Altus APS-3 + Juniper Mesa	COM7	115200
For more information, click on the + button! First pair Your devices in the Bluetooth Manager (pairing code: "default"), set the Outgoing port to COM7, but do not connect from Windows!
	Altus GeoPod
For more information, click on the + button! https://digiterraexplorer.com/altus-aps-geopod-configuration-with-digiterra-explorer/
	ASUS MyPAL A696	COM5	57600
For more information, click on the + button!
	CHC LT400	COM3	19200
For more information, click on the + button! http://forum.digiterra.hu/viewtopic.php?f=63&t=315
	CHC LT400 HS	COM3	57600
For more information, click on the + button! http://forum.digiterra.hu/viewtopic.php?f=63&t=324
	CHC LT500H	COM6	9600
For more information, click on the + button! Tutorial video for setting up the CHC LT500H.
	CHC LT500N	COM1	9600
	CHC LT500T	COM1	38400
For more information, click on the + button! Tutorial video for setting up the CHC LT500N and T.
	GIGABYTE gSmart MW702	COM4 COM5	57600 4800
For more information, click on the + button!
	Holux GPSmile 60	COM1	4800
For more information, click on the + button! Note: You should backup Your device after setting up everything, because in Windows Mobile v4.21 when the battery drains out the device is being reseted. (On newer devices this is not necessary.)
	HP 614 c	COM6	57600
For more information, click on the + button!
	HTC Touch HD	COM4	4800
For more information, click on the + button!
	Leica GG03
For more information, click on the + button! Tutorial video for setting up the Leica GG03.
	Mitac MIO P350	COM2	4800
For more information, click on the + button!
	Mitac MIO P360	COM2	57600
For more information, click on the + button!
	Mitac MIO P550	COM2	4800
For more information, click on the + button!
	Mitac MIO P560	COM2	57600
For more information, click on the + button!
	Mobile Mapper 100	COM2	19200
For more information, click on the + button! Tutorial video for the Mobile Mapper 100: Mobile Mapper 100 tutorial.
	Mobile Mapper 6	COM1	9600
For more information, click on the + button!
	Mobile Mapper CE	COM2	57600
For more information, click on the + button! This device is running Windows CE, it can run only DigiTerra Explorer v6.
	Mobile Mapper CX	COM2	57600
For more information, click on the + button! This device is running Windows CE, it can run only DigiTerra Explorer v6.
	Mobile Mapper 10	COM2	9600
For more information, click on the + button!
	Nautiz X8	COM1	9600
For more information, click on the + button!
	Promark 500	COM5	19200
For more information, click on the + button!
	Psion Teklogix Workabout Pro 7525 (Mobidus)	COM7 COM5	4800
For more information, click on the + button!
	Qmini M3 - QMini M1	COM3	19200
For more information, click on the + button! Go to the Settings/Command tab. Tap on Command file and choose the right file from the Scripts directory.
	QStar 5 and QStar 6	COM3	38400
For more information, click on the + button! 1. In Windows, check at Start/Settings/System/External GPS: GPS program port: None, GPS hardware port: None, Baud rate 4800, Check the Manage GPS automatically. 2. In DigiTerra Explorer Settings/GNSS tab: Port: COM3, Baud: 38400. On the NTRIP tab choose the same. Now got to Settings/Command tab, tap on Command file button and select the right script from the Scripts directory.
	QStar 8	COM4	38400
For more information, click on the + button! Tutorial video for setting up the Hi-Target Qstar 8.
	Spectra SP80	COM5	4800
For more information, click on the + button! Tutorial video for setting up the Spectra SP80.
	TopCon GMS-2	COM1	115200
For more information, click on the + button! When starting using Topcon GMS-2 with DigiTerra Explorer, you should do following initial settings. I. Check and modify GPS settings if necessary 1. Start CE-CDU program by clicking on the shortcut: 2. Search for "Configuration > Survey > Tracking Options..." menu, and start Tracking Options panel: 3. Use the following settings: i.e: Code multipath reduction: On Phase multipath reduction: Off Cinderella: On (when using a GLONASS-enabled receiver, should be always Off!) Satellite system: GPS+GLONASS Antenna: Internal Elevation mask, deg: 5 4. When finished settings, tap on File menu > Exit II. Setup DigiTerra Explorer on GLONASS-enabled receivers (If necessary, upgrade the software!) 1. Start the software 2. Tap on Settings panel > DGPS, and use the following settings: 3. Activate your GPS receiver You are now able to receive GLONASS and NAVSTAR satellites at the same time!
	TopCon GRS-1	COM7	115200
For more information, click on the + button! https://digiterraexplorer.com/dte7-and-topcon-grs1/
	Topcon HiPer SR
For more information, click on the + button! Tutorial video for setting up the Topcon HiPer SR.
	Trimble Geo 5T	COM2	57600
For more information, click on the + button! GNSS Controller - Setup GNSS settings - Enable NMEAIn Explorer: Com 2 and 57600
	Trimble Geo XT	COM2	57600
For more information, click on the + button! Trimble Geo XT 1. In GPS Controller, set up the NMEA messages (all of them). In the Setup menu tap on Options, then Disconnect from GPS receiver (or Settings/Memory tap on Stop button), to exit the program and release the GPS port. 2. In Windows, got to Start/Settings/GPS and set the hardware port (COM3, baud 57600), the software port (COM2). 3. Start DigiTerra Explorer, go to Settings/GNSS and set the port to COM2 and the Baud to 57600.
	Trimble GeoXH 2008	COM3
For more information, click on the + button! Trimble GeoXH 2008 NMEA mode: In GPS Controllerben sending NMEA sentences: Start: Start-->Programs --> GPS Controller // GPS setup: GPS Settings: GPS reciver port: COM 3 (Internal receiver) NMEA sentences: Setup: NMEA output: On (select everything) --> OK. In this way in DigiTerra Explorer use NMEA mode and COM 3 port. For TSIP mode, install the PFTools.cab and set the NMEA mode to OFF in GPS controller. Also disable the NMEA mode in DigiTerra Explorer.
	Trimble GeoXM PPC2003	COM3
For more information, click on the + button! - Install SDK (PFTools 242.STANDARD_PPC2003.CAB) - The TSIP mode is available now - Connect to the receiver on COM3 port.
	Trimble Juno 3B	COM4	4800
For more information, click on the + button! In Explorer 7 GNSS settings: - COM: 4 - Baud: 4800 System settings: Start/Settings/System/GPS Settings Programs: none Hardware port: COM4 - 4800 Manage GPS automatically (recommended): Yes
	Trimble Juno SB	COM4	4800
For more information, click on the + button! http://www.digiterra.hu/distribution/attmts/digiterraexplorer/gpscontroller/SupportNote_NMEA_Output_Juno.pdf
	Trimble Juno ST	COM7	4800
For more information, click on the + button! http://www.digiterra.hu/distribution/attmts/digiterraexplorer/gpscontroller/SupportNote_NMEA_Output_Juno.pdf
	Trimble Juno T41	COM3	115200
For more information, click on the + button! Tutorial video for setting up the Trimble Juno T41.
	TTNetCom 7000	COM5	19200
For more information, click on the + button!
	TTNetCom 8000	COM6	4800
For more information, click on the + button!